Connection Manager - Global

Automatically use recommended settings based on Detection Method

Check this option if you wish to let the Connection Manger track the connection status on both the source and target locations. When a lost connection is restored, PeerSync will restart real-time and/or scan Jobs if the option to "Scan Job once at start" is enabled. In addition, this logic will apply to only connections which are set for real-time monitoring.

Connection Manager for Failed Connections

Choose one of the following options to manually disable or enable the Connection Manger which tracks the connection status on the desired locations.

Disabled

Disable the Connection Manager

Enabled for Source Connections Only

Enable the Connection Manger to track the connection status only on the source location.

Enabled for Target Connections Only

Enable the Connection Manger to track the connection status only on the target location.

Enabled for Source and Target Connections

Enable the Connection Manger to track the connection status on both the source and target locations.

Connection Manager Options

Only include connections that are set for real-time monitoring

Set the Connection Manager to monitor only connections that are set for real-time detection.

Scan real-time Jobs on reconnect if "Scan Job once at start" is enabled

Set the Connection Manager to scan real-time Jobs on reconnect if the Scan Job once at start option is enabled.