Peer Global File Service Help > Preferences > NAS Configuration > Dell EMC Configurations > Dell EMC VNX/Celerra Credentials

The options are divided into two groups:

Dell EMC Storage Information-VNX-Advanced Options

Dell EMC VNX/Celerra Options for this Job

The following configuration options are available for Dell EMC VNX/Celerra devices:

Option	Description
Filter open/close events from these users	A comma-separated list of user names to exclude from access event detection. For example, if "USER1" is excluded, any access event activity generated by USER1 will be ignored, e.g., file is opened and closed.
Filter all events from these users	A comma-separated list of user names to exclude from all event detection. For example, if "USER1" is excluded, any activity generated by USER1 will be ignored, e.g., file is open and modified.
Filter events from these IP Addresses	A comma-separated list of IP addresses to exclude from all event detection. For example, if "192.168.0.100" is excluded, any activity generated by 192.168.0.100 will be ignored, e.g., file is open and modified.
Access Event Suppression Time	Represents the number of seconds that an open event will be delayed before being processed. Used to help reduce the amount of chatter generated by Windows clients when mousing over files in Windows Explorer. The default value is -1, which will be adjusted based on the selected NAS platform. A value of 0 will allow for dynamic changes to the amount of time that an open event will be delayed based on the load of the system.

The following advanced settings are available for Dell EMC VNX/Celerra devices:

Option	Description
Filtered IP Addresses	Optional. Events generated from these IP addresses will be filtered. It is recommended that the IP address of the CEE Server is added to this list.
Control Station IP	The Control Station IP address of the VNX/Celerra system.
Control Station Port	Optional. The Control Station Port number of the VNX/Celerra system. The default value is 443.
Control Station Username	The user name used to sign into the VNX/Celerra Control Station.
Control Station Password	The password used to sign into the VNX/Celerra Control Station.
Validate Control Station	Optional. If enabled, the VNX/Celerra Control Station will be validated both on registration and periodically by a maintenance thread.