To locate information about this keyword, please select one of the subentries in the list.
Enter value
%Desktop%
%Favorites%
%Fonts%
%Personal%
%Programs%
%Recent%
%SendTo%
%Start Menu%
%Startup%
%Templates%
/< (Applications to Ignore)
/0 (Set SNC File to Load)
/1 (Set Source Path)
/2 (Set Target Path)
/A (Scan at Start)
/AC (Run Run Post-Sync Validation Report with Checksums)
/AP (Run Pre-Sync Report)
/AV (Run Run Post-Sync Validation Report)
/C (Load Alternate Configuration File)
/D (Delay Scan at Start)
/GA (Set Empty File Delay)
/GB (Set Shadow Detection)
/GC (Set File Comparison Value)
/GD (Set Job Comparison Delta)
/GE (Set Shared Process Delay)
/GF (Use Alternate Copy File Methods)
/GI (Ignore File Size and/or Date Comparison)
/GK (Copy Thread Utilization)
/GL (Display status in Profiler)
/GLS (Display status in Profiler - Supress Initial Connection)
/GM (Enable MSMQ messaging)
/GO (Enable PSObserver Broadcasts)
/GP (Set Email Threads)
/GQ (Create and Append Summaries into One Report)
/GR (Report Non Standard Events)
/GS (Enable Summary Statistics Collection)
/GT (Get Remote PC Time)
/GV (Always Create Superset during Bi-directional Sync)
/GW (Enable Temp Files)
/GX (Use Delete Path for Revisions)
/GY (VSS Interval
/H (Hide Splash Screen)
/H- (Only Hide the about screen)
/I (Ignore Target Space During File Copy)
/J (Move Files)
/KA (Active Connection Interval)
/LA (Real-time Attribute Change)
/LB (Bi-directional Folder Deletion)
/LC (Use Last Access File Time)
/LD (Set Trigger Folder File Name)
/LE (Use Enhanced bi-directional synchronization mode)
/LF (Use Update Sensitivity)
/LG (Folder Change Detection)
/LG1 (Folder ACL Detection)
/LH (Set Deletion Move To Folder Cleanup Interval)
/LI (Target In-Use Replacement)
/LJFK (Convert Well-Known SIDs)
/LJP (Always Run Post Process)
/LJU (Exclude Folders that have a Reparse Point)
/LK (Set MultiTasking Delay)
/LL (Disable Real-time Security Change)
/LM (Set Failed Connection Timer)
/LMD (Disable Failed Connection Timer)
/LN (Set Processor Affinity)
/LPC (Set Maximum Number of Events to Process)
/LPD (Set Delay between Enhanced Real-Time Deletions)
/LPE (Set Delay between Enhanced Real-Time Event Processing)
/LPM (Set Enhanced Real-Time Event Upper Limit)
/LPQ (Set Delay between Enhanced Real-Time Queue Checking)
/LPW (Set Enhanced Real-Time Event Queue Delay)
/LPX (Set Process Delay for Enhanced Real-time Changes)
/LR (Run application at start of PeerSync)
/LSE (Log Service Events to the Event Viewer)
/LW (Enable Last Access Compare)
/LZR (NFS Replication)
/LZS (Compare and Set File Attributes from Windows to NetApp)
/LZTX (Remove Failed Events If Successfully Re-Processed)
/M (Show Tray Icon)
/MCT (Set Copy Threads)
/MFT (Set Job Threads)
/NODELFLDR (No not delete folders)
/O (Set Target File Overwrite)
/OPTIMIZE (Optimize Performance)
/PERFORMANCE (Set Application Priority)
/PROGRESS (Display status in PeerSync)
/Q7+s (Include Volumes for NetApp FPolicy Detection)
/Q70 (Exclude Common Job Exceptions in Event Processing for FPolicy Jobs)
/Q70s (Exclude Extensions for NetApp FPolicy Detection)
/Q7L (cDOT Optimizations)
/Q7O (Share Migration Reporting levels)
/Q7O (Share Migration support for cDOT 8.3)
/Q7-s (Exclude Volumes from NetApp FPolicy Detection)
/Q8B (In Queue Display Options)
/Q8BH+ (Enable the Historical Data Tab)
/Q8BJ+ (Enable Job Scans Tab)
/QB (Use Full Access File Copy)
/QD (Always Use Partial Locked File Extensions List For VSS)
/QF (Shadow Time Range)
/QG (Always use the local machine time for the Last Run Time)
/QH (Force Flush File Buffers)
/QHD (Direct Disk Write)
/QI (Ignore Matching/Locked File Extensions)
/QJ (Ignore Matching/Locked File Postfix Replacement)
/QP (Disable Job Stats)
/QP (Don't Display Job Stats)
/QQ (Enable the File Copy Progress Tab)
/QQ<< (/QQ<< (Disable the Show Advanced Display link)
/QR (Exclude Common Job Exceptions in Event Processing)
/QY7 (XML File Creation Interval)
/QYD (Set Safety Value for Last Run Time)
/R (Real time Monitoring Argument)
/S (Run Scheduled Operation)
/SNMP (Enable SNMP Error Reporting)
/Sx (Synchronization Timer Argument)
/SxKz (Synchronization Timer Argument with Keyboard Activity)
/T (Terminate All Instances of PeerSync
/TD (Display status in PeerSync upon completion)
/TIME (Daily Timer)
/UDD (Use Device Driver method)
/USEPROFILEARG
/VRB (Verify User-Name)
/W (Set Queue Directory Change Count)
/WPFIX (Disable application associated with sync)
/WPMOD (WordPerfect Fixes for synchronization)
/X (Disable Initial Synchronization During Startup)
/YC (Folder Queue Watch Interval)
/YD (Allow Replication During Dynamically Created Jobs)
/YF (Partial Locked File Extensions List)
/YK (Set Real-time Copy Thread Pool)
/YK:n (Set Real-time Copy Thread Pool)
/YL (Log Messages Only to a Log File by Filter and/or by Profile)
/YL (Log Messages Only to a Log Filter and/or by Profile)
/YN (Use Network Password Dialog)
/YO (Retain Last Access Time for Two Machine bi-directional synchronization)
/YO- (Retain Last Access Time)
/YR (Delete Empty Source Folders After Move)
/YV (Do Not Validate Connections Before Profile is Loaded)
/YX:n (Set File Read/Write Buffer Delay)
/YY (Set VSS Try Count)
/Z (Ignore Open File Extensions)
127.0.0.1
About PeerSync
Accessing Open Files
ACL Options (Global)
Activate real-time monitoring
Active Connection Interval
Active Job
Active Profile List
Add Jobs with Wizard
Add - synchronize new files to target
Add Jobs
Add Quick-Sync Folder option to Explorer menu
Add Shares with the selected Prefix
Add Shares with the selected Suffix
Add Shares: Do Not Update or Delete
Add to Windows registry
Add to Windows StartUp
Add/Delete/Modify Jobs: Tool Buttons
Added Files Reporting Feature
Added Indicator
Additional Event Options
Additional Features
Additional Features List
Additional Features Screen:
Additional Options
Enable file recovery
Perform binary comparison on all files (using CRC32)
Replace in-use files upon reboot
Validation Options
Additional File Includes
Additional Folder Selection Features
Additional Options
Additional/Alternate Target Paths
Admin Backup
Admin Report Cycle Options
Admin Reporting
Admin Reporting Features
Admin Reporting Screen:
Admin Reporting Overview
Report file name
Report File Path
Use error information only
Use standard report file content
Use Summary Information Only
Administrative report file storage manipulation and organization
Advanced Backup
Advanced Options
Advanced View
Affinity
After each scan
After each scan (log all non-scan events on the cycle specified)
After each scan/cycle even if no events occurred
After synchronization subtract/add x minute(s) from target
Allow for remote real-time configuration - NetApp fPolicy
Allow Replication During Dynamically Created Jobs
Alternate Configuration File
Alternate Data Stream (ADS) Backup
Alternate Target Path Selection Dialog
Alternate/Additional Target Paths
Always create a super-set during bi-directional synchronization
Always Create Superset during Bi-directional Sync
Always overwrite
Always Run Post Process
Always Use Partial Locked File Extensions List For VSS
Always use the local machine time for the Last Run Time
Application Priority
Applications to Ignore
Argument Selection
Argument Selection from the Interface
Arguments
Asynchronous Mode - cDOT Options
At the start of this Profile
At the stop of this Profile
Attach log file to messages
Attribute Exceptions
Automatically detect and use recommended NetApp configuration
Automatically use recommended settings based on Detection Method
Automation
Automation Command Line Arguments:
Applications to Ignore
Daily Timer
Delay Scan at Start
Device Driver method
Disable Initial Synchronization During Startup
Interval
Keyboard Activity
Real time Monitoring Argument
Run Scheduled Operation
Scan at Start
Synchronization Timer Argument
Synchronization Timer Argument with Keyboard Activity
Timer Argument
Use Device Driver method
Automation Features
Automation Screen:
Activate real-time monitoring
Automation Screen Overview
Daily Timer Options
Run at specific times and selected days
Run on an interval every x minute(s)
Use enhanced real-time monitoring
Back Button
Back-Up
Bandwidth throttling
Basic View
Bi-directional Command Line Arguments:
Always Create Superset during Bi-directional Sync
Bi-directional Folder Deletion
Enable Temp Files
Retain Last Access Time
Set Safety Value for Last Run Time
Set Trigger Folder File Name
Use Enhanced bi-directional synchronization mode
Use Last Access File Time
Bi-directional Folder Deletion
bi-directional synchronization
bi-directional synchronziation
Binary Comparison
Bi-Sync Options Button
blackout
Blackout Settings
Block Size Selection
Buffer Size - File Read/Write
Buffer Size Upper Limit
Buttons
Byte Replicator
ByteReplicator
Block Size Selection
Excluded File Types
Exclusions
Minimum File Size
Port
Time Out
Carbon Copies - Email Reporting
cDOT Options - Global:
Asynchronous Mode
Disable Alternate Share Lookup
Changing Profile Job List Window
Check for ACL changes during scans
Checked Indicator
Choose external applications/scripts to be run before and after the processing of a given Job
CIFS - Permissions
CIFS - Scan Method
CIFS/NFS Security Style
Clear List
Clear Log File
collect real-time events
Command Line Argument Selection
Command Line Argument Selection from the Interface
Command Line Arguments
Compare and Set File Attributes from Windows to NetApp
Compare Time Change
Compression - TCP Target
Compression Status
Computer Name Variable
Configuration Command Line Arguments:
Alternate Configuration File
Load Alternate Configuration File
Set SNC File to Load
Set Source Path
SNC File
Use Arguments from Profile
Configure - NFS Settings
Configure Normal Source Folder
Configure Normal Target Folder
Configure TCP Source Folder
Configure TCP Target Folder
Connect As - Network Logon Setting
Connect to and monitor any PeerSync currently running on your LAN
Connection Manager
Only include connections that are set for real-time monitoring
Scan real-time Jobs on reconnect if "Scan Job once at start" is enabled
Connection Manger for Failed Connections - Source Folder:
Disabled
Enabled for Source and Target Connections
Enabled for Source Connections Only
Enabled for Target Connections Only
Convert to GMT for comparison purposes
Copy File Method - Global:
Admin Backup
Advanced Backup
Advanced Backup with Permissions
CIFS - CopyFile API - /GFC Argument
CIFS - CopyFileEx API - /GFE Argument
CIFS - Default
CIFS - File Stream Method - /GFS Argument
NFS - Unix/Linux cp command
NFS - Unix/Linux rsync command
Copy Jobs
Copy Thread Utilization
Copy Threads
Copyright
CRC32
Create a report for every event
Create a report on an interval
Create a report once a day
Create a report once a week
Create administrative Email messages
Create administrative report files
Create and Append Summaries into One Report
Create Email messages
Create Normal Souce Auto Job Name
Create Normal Target Auto Job Name
Create Pre Sync Report
Create Shortcut on Desktop
Create SNC extension association for Profiler
Create Source Folder
Create Target Folder
Create Target TCP Auto Job Name
Create TCP Source Auto Job Name
Current Arguments
Current Arguments Button
Current Attributes
Current Command Line Argument Selection
Customize Selection Tree
Customized View
Daily Timer
Daily Timer Options
Date variables for Folder Paths
Date/Time Variable
Dates Exceptions
Day variables for Folder Paths
Days of the week scheduling
Default inclusion
Default Read/Write Buffer Size
Delay between Enhanced Real-Time Deletions
Delay between Enhanced Real-Time Event Processing
Delay between Enhanced Real-Time Queue Checking
Delay Scan at Start
Delayed Write Failed
Delete 7-Mode FPolicy
Delete Empty Source Folders After Move
Delete fPolicy on Close - NetApp Settings
Delete Jobs
Delete log file after successful send
Delete Unmatched Target Files
Delete unmatched target files older than x days
Deleted file storage manipulation and organization
Deleted Indicator
Deletion Folder
Deletion Options
Deletion Options Button
Destination IP
Detection Method Options:
Allow for remote real-time configuration
Exclude Users
Detection Method:
Default
EMC CEE Celerra/VNX
EMC CEE Isilon
NetApp FPolicy 7-Mode
NetApp FPolicy cDOT
Device Driver method
Disable all Startup Options
Disable Alternate Share Lookup - cDOT Options
Disable application associated with sync
Disable cDOT FPolicy
Disable Failed Connection Timer
Disable Initial Synchronization During Startup
Disable Real-time Security Change
Disabled - Connection Manager
Display status in PeerSync
Display status in PeerSync upon completion
Dissimilar time zone synchronization
Distribution
Do Not Validate Connections Before Profile is Loaded
Drag and Drop Source Folder Selection
Drag and Drop Target Folder Selection
Drive Mapping
During comparison subtract/add x minute(s) from target
Dynamic Network Drive Mapping and Un-mapping
Dynamic archives
Dynamic synchronization based on date
Dynamic synchronization based on logged on user or machine name
Dynamic synchronization based on personal folders or other variables read in from the registry
Easy way to synchronize folders on the fly
Edit Job Groups Dialog
Edit Menu
Edit Normal Source Variable File
Edit Normal Target Variable File
Elapsed Time Indicator
Email Report Cycle Options
Email reporting
E-mail Reporting
Email Reporting Features
Email Reporting Overview
Email Reporting Screen:
Attach log file to messages
Create administrative Email messages
Delete log file after successful send
Report file name - Email Reporting
Use error information only
Use standard report file content
Use summary information only
Email Threads
Embedded Open File Manager
EMC Celerra/Isilon Settings
EMC Celerra/VNX Settings
Enable CIFS Screening
Enable file recovery
Enable intelligent network load balancing
Enable intelligent network load balancing (when applicable)
Enable Last Access Compare
Enable NFS Extended Reporting and Display - Permissions
Enable NFSv3 Screening
Enable NFSv4 Screening
Enable PSObserver Broadcasts
Enable SNMP Error Reporting
Enable Summary Statistics Collection
Enable Temp Files
Enabled for Source and Target Connections - Connection Manager
Enabled for Source Connections Only - Connection Manager
Enabled for Target Connections Only - Connection Manager
Encryption - TCP Target
Enhanced real-time
Enhanced Real-Time Event Queue Delay
Enhanced Real-Time Event Upper Limit
Enhanced Scan Processing
Error Reporting
Evaluating a new version of PeerSync
Event Options
Exception Screen Features
Exceptions
Exceptions Screen:
Exceptions Screen Overview
Exclude Files by Character/String/Extension
Exclude Files from Sync by Size
Exclude Files in Sync by Attribute
Excluding Folders from Sync
Include File Types (using wild cards)
Include Files in Sync by Attribute
Include Files in Sync by Date
Exclude all open files until closed
Exclude Extensions - NetApp fPolicy
Exclude Extensions - NetApp Settings
Exclude File Sizes
Exclude Files
Exclude Files Button
Exclude Folders
Exclude Folders Button
Exclude Folders drop down list
Exclude Folders that have a Reparse Point
Exclude IP Address - NetApp fPolicy
Exclude IP Address - NetApp Settings
Exclude open files
Exclude open files (allow read access to source file during transfer)
Exclude open files (deny all access to source file during transfer)
Exclude root folders
Exclude specific folders only
Exclude Users - NetApp fPolicy
Exclude Volumes - NetApp Settings
Excluded Indicator
Exclusion drop down list
Exclusive Remedy
Executable Path (PeerSync)
Explore Source Folder
Explore Target Folder
Failed connection
Failed Registration
FastSync Settings
Features
File Date Reporting Feature
File Dates
File Deletion Options
File Exclusions
File Folder Path Variables
File Indicator
File Menu
File Options
File Options Features
File Options Screen:
Add - synchronize new files to target
Avoiding Permanent Deletion
Delete Unmatched Target Files
Delete Unmatched: Options
Deletion Warning Message
Mode Selection
Replicate - Delete unmatched files/folders
Update - synchronize existing files in target
Use Windows Recycle Bin
File Path Variables
File Path Variables: Folder Selection
File Read/Write Buffer Size
File Recovery
File Size Reporting Feature
File Sizes
File Time Change Options
File Time Reporting Feature
File Versions
File/Folder Permission Options:
Global Settings
NTFS Options
Transfer File and Folder Permissions
Files Indicator
Folder ACL Detection
Folder Change Detection
Folder Creation Reporting Feature
Folder Names Reporting Feature
Folder Queue Watch Interval
Folder Restoration feature in real-time
Folder Selection
Folder Selection Features
Folder Selection Screen:
File Path Variables
Folder Selection Screen Overview
Source Folder Selection
Target Folder Selection
Folders Indicator
For each individual error message as it occurs
for each message/error as it occurs
Force Flush File Buffers
Force Source Folder Root as Target TCP Folder Root
fPolicy Name - NetApp Settings
FPolicy Utility Features:
Delete 7-Mode FPolicy
Disable cDOT FPolicy
General
Get Info - cDOT Options
Get Info - System Information for Source Host
Get Remote PC Time
Global ACL Options
Global Advanced File Xfer Options
Global bi-directional Options
Global Display Options - Profiler Options
Global Managed Files Options
Global Migrate Shares Options
Global Recovery/Offline Options
Global Settings - Permission Options
Global Settings (PeerSync):
Global VSS Options
Greater Than File Size Exclusion
H+ (Skip setting of main form visible)
Help Button
Help Menu
Hide
Hide Splash Screen
Host Name
Host Server Name - NetApp Settings
Hour variables for Folder Paths
Ignore File Size and/or Date Comparison
Ignore Matching/Locked File Extensions
Ignore Matching/Locked File Postfix Replacement
Ignore Open File Extensions
Ignore Target Space During File Copy
Improve Load Balancing
Include all open files
Include attribute change as synchronization criteria
Include Files
Include Files Button
Include open files
Include open files (allow read & write access to source file during transfer)
Include open files (allow read access to source file during transfer)
Include open files (if possible)
Include partially open files
Include Shares - cDOT Options
Include Sub foldersFolder Selection Screen:
Include Source Sub-Folders
Include Volumes - NetApp Settings
Inclusion drop down list
Information Required to Register software
initiate scan on trigger file change
Initiate Synchronization on Source or Target File/Folder Change
Install Service (PeerSync)
Intelligent Network Load Balancing
Intermediate View
Interval
Intervals Button
IP Address - NFS Settings
Item Count
job data import
Job Indicator
Job Menu
Job Scan Method - Global:
CIFS - Default
NFS - Unix/Linux rsync command
Job Settings (PeerSync):
Job Threads
Jobs
Keep backup files of overwritten Target Files
Keep files in Alternate Folder
Keep files in Deletion Folder
Keep files in Target Folder
Keep multiple versions of files
Keyboard Activity
Large File or Compression Status
Last Run On
Last Run On - Reset
Last Run On Feature
Last Save
Last Scan
Launch (PeerSync)
Launch Current Profile
Left side Panel - Selection Tree
Less Than File Size Exclusion
License
Limit CPU usage during file transfers
Limit number of processors to use
Limit system resources during file transfers
Limitations of Liability
Limited Warranty
List of Exclude Files (using sub strings)
List of Exclude Folders
List of Include File Types (using wild cards)
List of Job Selections - Daily Timer
Load Alternate Configuration File
Load Balancing
Log File - Clear
Log File - View
Log file storage/manipulation/organization
Log Files: Administrative
Log Messages by Filter
Log Messages by Profile
Log Messages Only to a Log File by Filter
Log Messages Only to a Log File by Filter and/or by Profile
Log Messages Only to a Log File by Profile
Log Service Events to the Event Viewer
loopback
Managed Files
Managed Files Arguments:
Always Use Partial Locked File Extensions List For VSS
Set VSS Base Timeout
Set VSS Try Count
VSS Interval
Management IP - cDOT Options
Match Shares: Add, Update and Delete
Maximize Speed
maximum duration of scans
Maximum List Size
Maximum Log File Size
Maximum Number of Events to Process
Menu (PeerSync):
Edit
File
Help
Job
Options
PeerSync Tray Icon PopUp Menu
Run
View
View Popup Menu
Messages Indicator
Messages Reporting Feature
Migrate Shares
Minute variables for Folder Paths
Miscellaneous
Mode Indicator
Mode Selection
Modify NFS Default Options:
NFS mount Options
NFS rsync Options
Monitor ACL changes during real-time
Monitor PeerSync activity across the LAN
Monitor Remote Instances of PeerSync
Month variables for Folder Paths
Mount Folders - NFS Settings
Move Files
Move Job Down
Move Job Up
MS Windows Explorer Add On - Quick-Sync
MSMQ messaging
Multiple Copy Threads
Multiple Job Threads
Naming and Renaming Jobs
NetApp FPolicy - Source Folder NetApp Settings
NetApp FPolicy 7Mode
NetApp FPolicy Additional Settings:
Exclude Extensions
Exclude IP Address
Exclude Volumes
Include Volumes
NetApp FPolicy cDOT
NetApp FPolicy cDOT Additional Settings:
Include Shares
Management IP
Primary Server
NetApp FPolicy cDOT SVM Logon Settings:
Password
Username
NetApp FPolicy Screening Options:
Enable CIFS Screening
Enable NFSv3 Screening
Enable NFSv4 Screening
NetApp Settings :
Delete fPolicy on Close
fPolicy Name
Host Server Name
Root Path Prefix
Use Asynchronous Mode
Use cDOT Detection
NetApp Settings:
Network Constant - TCP Target
Network Drive Mapping
Network License
Network Load Balancing
Network Logon Settings:
Connect As
Password
New Profile
Next Button
NFS - Permissions
NFS - Scan Method
NFS mount Options
NFS Replication
NFS rsync Options
NFS Settings
NFS Settings Screen:
Configure
IP Address
Mount Folders
Password
Unmount Folders
User Name
No not delete folders
Non Persistent Processes
Normal
Normal Source
Normal Source Mode Selection
Normal Source PopUp
Normal Target
Normal Target Mode Selection
Normal Target PopUp
NTFS Options
Number of backup files to keep
Offloaded Data Transfer (ODX)
Only Hide the about screen
Only use Advanced Settings
Open File Manger Options
Open File Options
Open Files
Open Profile
Open Source Folder
Open Target Folder
Open/Locked Files
Optimize Performance
Optimize speed
Options Menu
Options/Commands
Options/Commands Features
Options/Commands Overview
Options/Commands Screen:
Current Arguments
Current Arguments Button
Overview
Set Access Password
Show tray icon
Other Global Options/Command
Overview
Overwrite Existing Log File
Overwrite existing Pre-Sync report file
Parameter Selection from Profiler
Partial Locked File Extensions List
Password - Network Logon Setting
Password - NFS Settings
Password - Registration
Password - TCP Target
Password for Tray Icon
Passwords - cDOT Options
Path (PeerSync)
Path to Host
Path to Host - TCP Target
pause scan during specific times
Pause Service (PeerSync)
PeerLock Selection Tree Category
PeerSync Command Line Arguments
PeerSync Global Settings
PeerSync Remote Control
PeerSync Selection Tree Category
PeerSync Service:
In Sync
Launch PeerSync
Pause Service
Resume Service
Run as a service
Start Service/Application
Stop Service/Application
Trending
PeerSync Status Display
PeerSync Status Display Popup Menu
Perform binary comparison on all files (using CRC32)
Performance
Performance - Threads
Performance Command Line Options:
Affinity
Application Priority
Copy Thread Utilization
Copy Threads
Email Threads
Job Threads
Limit CPU usage during file transfers
Limit number of processors to use
Limit system resources during file transfers
Optimize Performance
Priority
Processor Affinity
Set Application Priority
Set Copy Threads
Set Email Threads
Set File Read/Write Buffer Delay
Set Multitasking Delay
Set Processor Affinity
Set Real-time Copy Thread Pool
Set Shared Process Delay
Set the percentage of copy threads to reserve for real-time events
Shared Process Delay
Thread Utilization
Threads
Performance Features
Performance Options All Jobs
Performance Package
Performance Priority Selection
Performance Screen:
Enable intelligent network load balancing (when applicable)
File Read/Write Buffer Size
Set maximum number of copy threads to x
Throttle bandwidth - Use x percent of available bandwidth
Permissions
Permissions (Security style) - Global:
CIFS - Default (NTFS)
Enable NFS Extended Reporting and Display
NFS - Unix/Linux down and chmod commands (UNIX)
Pop Up Menu: Profile Job List
Pop Up Menu: Selection Tree
Port - Email Reporting
Port - TCP Target
Port Configuration
Post process application
Pre process application
Pre/Post Features
Pre/Post Overview
Pre/Post Process
Pre/Post Process Overview
Pre/Post Process Screen:
Select Application/Script to Run After
Select Application/Script to Run Before
Use maximum wait time of x seconds
Wait for application to end before continuing
Preserve Paths
Pre-Sync Report Options
pricing information
Primary Server - cDOT Options
Print
Priority
Priority Selection
Process Delay for Enhanced Real-time Changes
Process Migrate Shares after each scan
Process Migrate Shares every x minute(s)
Processed Lists
Processor Affinity
Product Definitions
Product Support
Product Updates
Profile Description:
Default Description
Hiding Profile Description Toolbar
Moving Profile Description Toolbar
Profile Indicator
Profile Job List Pop Up Menu
Profile Job List:
Add/Delete/Modify Jobs
Changing Size of Window
Naming and Renaming Jobs
Selecting Jobs and Multiple Jobs
Profile Options: Customize
Profile Options: Show All
Profile Selection
Profile Selection List
Profiler
Profiler Command Line Arguments
Profiles
PSError.log
PSObserver Broadcasts
Quantity Discounts
Quick-Sync
Quick-Sync Folder
Quick-Sync Profile
Quit
Real time File Folder Change Detection
Real Time Mode
Real time Monitoring Argument
Real Time Options
Real-time Attribute Change
Real-Time Command Line Arguments:
Disable Real-time Security Change
Folder ACL Detection
Folder Change Detection
NFS Replication
Real-time Attribute Change
Set Delay between Enhanced Real-Time Deletions
Set Delay between Enhanced Real-Time Event Processing
Set Delay between Enhanced Real-Time Queue Checking
Set Empty File Delay
Set Enhanced Real-Time Event Queue Delay
Set Enhanced Real-Time Event Upper Limit
Set Maximum Number of Events to Process
Set Process Delay for Enhanced Real-time Changes
Set Real-time Copy Thread Pool
Set Shadow Detection
Use Update Sensitivity
Real-time Copy Thread Pool
Real-Time Event Detection Options
Real-time Monitoring
Real-time Options Button
Reboot Options Button
receive an e-mail at start of profile
receive an e-mail at stop of profile
Recovery Intervals Button
Register by FAX
Register by mail
Register by phone
Register online
Registering Evaluation Copy of PeerSync
Registering Unregistered Copy of PeerSync
Registration and Passwords:
Entering User ID/Password (Evaluation Copy)
Register By Mail
Registry variables to use in Folder Paths
Related Global Settings
Relative Paths
Re-load Profile
Remote Connection Information
Remote Connection Licenses
Remote Control
Remove Failed Events If Successfully Re-Processed
Remove Service (PeerSync)
Rename Job
Replace In use Files Options
Replace in use files upon reboot
Replace Shares: Add and Overwrite
Replicate - Delete unmatched files/folders
Replication
Report file name
Report file path
Report Non Standard Events
Reporting
Reporting Command Line Arguments:
Create and Append Summaries into One Report
Display status in PeerSync
Display status in PeerSync upon completion
Enable PSObserver Broadcasts
Enable SNMP Error Reporting
Enable Summary Statistics Collection
Error Reporting
Hide Splash Screen
Log Messages by Filter
Log Messages by Profile
Log Messages Only to a Log File by Filter
Log Messages Only to a Log File by Filter and/or by Profile
Log Messages Only to a Log File by Profile
Log Service Events to the Event Viewer
MSMQ messaging
Only Hide the about screen
PSObserver Broadcasts
Report Non Standard Events
Run Pre-Sync Report
Show Tray Icon
Skip setting of main form visible
SNMP Error Reporting
Summary Report
Summary Statistics Collection
Suppress connection of PeerSync to the Profiler
Tray Icon
Reporting Features
Reporting Screen:
Clear Log File
Include Options
Maximum Log File Size
Overview
Overwrite Existing Log File
Use Log File
View Log File
Reporting Standard report file content
Reporting Summary Information Only
Reset Last Run On Value
Resume Service (PeerSync)
Retain Last Access Time
Retry failed connections every x minutes
Retry open files every x seconds
retry open inaccessible files
Retry Options Button
Revisioning
Revisions
Root Path - TCP Target
Root Path Prefix - NetApp Settings
Run a Pre-Sync Report (do not sync files/folders)
run a scan on reconnect
Run application at start of PeerSync
Run as a service (PeerSync)
Run at specific times and selected days
Run External applications/scripts before and after the processing of a given Job
Run Menu
Run Pre-Sync Report
Run RegEdit
Run Scheduled Operation
Run selected Jobs at a specific time of day
Run VSS every x minutes
Run/View
Run/View (PeerSync):
In Sync
Launch PeerSync
Pause Service
Resume Service
Run as a service
Start Service/Application
Stop Service/Application
Trending
Run/View Current Profile Activity Screen:
Added Indicator
Checked Indicator
Deleted Indicator
Elapsed Time Indicator
Excluded Indicator
File Indicator
Files Indicator
Folders Indicator
Job Indicator
Messages Indicator
Mode
Profile Indicator
Size Indicator
Skip Files Button
Source Indicator
Target Indicator
Target Space Indicator
Updated Indicator
Running Jobs vs. Running Profiles (Run a Quick Sync)
Sample Exclusions
Save As
Save Profile
Saving Profiles
Scan at Start
Scan limitations
Scanning Options
Scheduled Mode
Scheduling Options
Security style
Select a folder for deleted files to be placed
Select Application/Script to Run After
Select Application/Script to Run Before
Select days of the week to run Jobs
Select Source Folder
Select Source Folder Button
Select Target Folder
Select Target Folder Button
Selected File Dates
Selecting Jobs
Selecting Multiple Jobs
Selecting Source Folders
Selecting Target Folders
Selection Tree
Selection Tree: Customize Options
Send an email for every event
Send an email on an interval
Send an email once a day
Send an email once a week
Service (PeerSync)
Service Details (PeerSync)
Set Access Password
Set Alternate/Additional Normal Targets
Set Application Priority
Set CIFS Defaults Button
Set Copy Threads
Set Deletion Move To Folder Cleanup Interval
Set Email Threads
Set Empty File Delay
Set Failed Connection Timer
Set File Comparison Value
Set File Read/Write Buffer Delay
Set Job Comparison Delta
Set maximum number of copy threads to x
Set maximum number of retries to x
Set Multitasking Delay
Set NFS Defaults Button
Set Processor Affinity
Set Queue Directory Change Count
Set Real-time Copy Thread Pool
Set Safety Value for Last Run Time
Set Shadow Detection
Set Shared Process Delay
Set SNC File to Load
Set Source Path
Set Target File Overwrite
Set the maximum log file size to x bytes
Set the percentage of copy threads to reserve for real-time events
Set Today's Date Button
Set Trigger Folder File Name
Set VSS Try Count
Shadow Time Range
Share Migration support for cDOT 8.3
Shared Process Delay
Show Advanced/Normal Display
Show All Profile Options
Show Pre-Sync report file at end of run
Show Tray Icon
Show/hide Selection Tree
Show/hide the Selection Tree
Simple Network Management Protocol reporting
Size Indicator
Skip File Button
Skip setting of main form visible
SMTP Host - Email Reporting
SNC File
SNMP Error Reporting
SNMP Options Button
SNMP reporting
Source and Target Selections
Source Configuration
Source File/Folder Alterations
Source Folder Connection Manager
Source Folder Field
Source Folder NetApp Settings
Source Folder Popup Menu
Source Folder Selection
Using Normal Mode
Using TCP Mode
Source Folder Selection Button:
Create Source Button
Explore Source Button
Open Source Button
Source Indicator
Specific time scheduling
Standard synchronization
Start Service/Application (PeerSync)
Startup/Service
Startup/Service (PeerSync):
Add to Windows registry
Add to Windows StartUp
Create Shortcut on Desktop
Create SNC extension
Disable all Startup Options
Executable Path
Install Service
Quick-Sync Folder Option
Remove Service
Run RegEdit
Service Details
Status Display
Status Screen
Stop Service/Application (PeerSync)
store events while connection is down
store missed events and process on reconnect
Summary Report
Summary Reporting Feature
Summary Statistics Collection
Suppress connection of PeerSync to the Profiler
suspend file transfer
Swap Source and Target Folders
Sync Selected Jobs
Synchronization
Synchronization Command Line Arguments:
Active Connection Interval
Allow Replication During Dynamically Created Jobs
Always Run Post Process
Always use the local machine time for the Last Run Time
Compare and Set File Attributes from Windows to NetApp
Delete Empty Source Folders After Move
Disable application associated with sync
Disable Failed Connection Timer
Do Not Validate Connections Before Profile is Loaded
Enable Last Access Compare
Exclude Folders that have a Reparse Point
Folder Queue Watch Interval
Force Flush File Buffers
Get Remote PC Time
Ignore File Size and/or Date Comparison
Ignore Matching/Locked File Extensions
Ignore Matching/Locked File Postfix Replacement
Ignore Open File Extensions
Ignore Target Space During File Copy
Move Files
No not delete folders
Partial Locked File Extensions List
Run application at start of PeerSync
Set Deletion Move To Folder Cleanup Interval
Set Failed Connection Timer
Set File Comparison Value
Set Job Comparison Delta
Set Queue Directory Change Count
Set Target File Overwrite
Shadow Time Range
Share Migration support for cDOT 8.3
Target In-Use Replacement
Terminate All Instances of PeerSync
Use Alternate Copy File Methods
Use Delete Path for Revisions
Use Full Access File Copy
Use Network Password Dialog
Verify User-Name
WordPerfect Fixes for synchronization
Synchronization of files between dissimilar time zones
Synchronization Timer Argument
Synchronization Timer Argument with Keyboard Activity
Synchronize ALL files via Managed Files
Synchronize open/locked files via Managed Files
Synchronize Selected Jobs Option
System Information for Source Host - cDOT:
Get Info
System Information for Source Host:
Get Info
Target Configuration
Target File Time Change Option
Target File/Folder Alterations
Target Folder Field
Target Folder Popup Menu
Target Folder Selection
Target Indicator
Target In-Use Replacement
Target Space Indicator
TCP Source
TCP Source Mode Selection
TCP Source PopUp
TCP Target
TCP Target Configuration Tab
TCP Target Mode Selection
TCP Target PopUp
TCP Target Port Configuration Tab
TCP Wan Connector Option
Temp Files
Term and Trial Period
Terminate Active Profile
Terminate All Instances of PeerSync
Thread Utilization
Threads
Throttle bandwidth
Throttle bandwidth - Use x percent of available bandwidth
Time Change After Sync
Time Delta Selection
Time Out - TCP Target
Time variables for Folder Paths
Time Zone Option
Timer Argument
Tool Buttons
Tool Buttons:
Add Job
Back
Copy Job
Delete Job
Help
Hiding/Moving Toolbar
Launch Current Profile
Move Job Down
Move Job Up
New Profile
Next
Open Profile
Overview
Rename Job
Save Profile
Settings Screens Drop-Down List
Show Selection Tree
Terminate Active Profile
Toolbars: Profile Description
Transfer File and Folder Permissions
Transfer Time Reporting Feature
Trap Prefix
Tray Icon
Tray Icon Popup Menu
Tree
trigger file
Turn file archive attribute off after synchronization
Uninstall previous versions of PeerSync
Unmount Folders - NFS Settings
Update - synchronize existing files in target
Updated Files Reporting Feature
Updated Indicator
Updates: Product
Upgrade
Upgrade Information
Upgrade PSListener
Use Alternate Copy File Methods
Use Arguments from Profile
Use Asynchronous Mode - NetApp Settings
Use Block Byte Level Synchronization
Use block/byte level synchronization
Use cDOT Detection - NetApp Settings
Use daily timer scheduling
Use Delete Path for Revisions
Use Device Driver method
Use Enhanced bi-directional synchronization mode
Use enhanced bi-directional synchronization mode options
Use enhanced real-time monitoring
Use error information only
Use Full Access File Copy
Use intermediate file during copy:
Use Last Access File Time
Use Log File
Use maximum wait time of x seconds
Use Network Password Dialog
Use Optional Target Unix Linux Settings
Use SNMP reporting
Use standard report file content
Use summary information only
Use Unix/Linux system for Job Scans, Copy File and/or setting Permissions
Use Update Sensitivity
Use Variables for folder paths stored in registry
Use VSS
User ID - Email Reporting
User Name - NFS Settings
User Name - TCP Target
User Name and Password
User Name variable
Usernames - cDOT Options
Using # in Excluding Folders
Using Variable Paths
Using Wild Cards for files to Include
Validate target file (using CRC32)
Validation Options
variable data import
Variables
Variables: File Path
Verify User-Name
version of files
View Admin Folder
View Alternate Target Path Selection
View Log File
View Menu
View PeerSync activity across the LAN
View Popup Menu
View Target Folder
Volume Shadow Copy Service (VSS)
VSS
VSS Interval
Wait for application to end before continuing
Web Farms
What email address to send from
Who to send emails to
Window: Changing Height of Profile Job List
Windows Explorer Add On - Quick-Sync
Windows Platforms
Windows Variables for Folder Paths
WordPerfect Fixes for synchronization
Working With Jobs
Working with Profiles
Year variables for Folder Paths