The Connection Manager tracks and determines if connections are lost to source and/or target folders. With this new capability PeerSync can proactively detect when a connection is lost or reconnected, giving the ability to restart real-time and/or scan Jobs if needed.
Automatically use recommended settings based on Detection Method
|
Check this option if you wish to let the Connection Manger track the connection status on both the source and target locations. When a lost connection is restored, PeerSync will restart real-time and/or scan Jobs if the option to "Scan Job once at start" is enabled. In addition, this logic will apply to only connections which are set for real-time monitoring.
|
Connection Manager for Failed Connections
Choose one of the following options to manually disable or enable the Connection Manger which tracks the connection status on the desired locations.
|
Disabled
|
Disable the Connection Manager
|
Enabled for Source Connections Only
|
Enable the Connection Manger to track the connection status only on the source location.
|
Enabled for Target Connections Only
|
Enable the Connection Manger to track the connection status only on the target location.
|
Enabled for Source and Target Connections
|
Enable the Connection Manger to track the connection status on both the source and target locations.
|
|
|
|
Connection Manager Options
|
Only include connections that are set for real-time monitoring
|
Set the Connection Manager to monitor only connections that are set for real-time detection.
|
Scan real-time Jobs on reconnect if "Scan Job once at start" is enabled
|
Set the Connection Manager to scan real-time Jobs on reconnect if the Scan Job once at start option is enabled.
|
|