<< Click to Display Table of Contents >> Navigation:  PeerSync Help > Interface Features > Selection Tree > PeerSync > PeerSync Job Settings > Folder Selection > Target Folder Selection > Alternate Target Path Selection Enhanced Package

This link will be enabled if you are using a Normal Target Mode Selection. By selecting this link you can set and access your current Alternate Target Path Selections. Through this feature, Jobs can now have alternate or additional Target paths associated with the base Job. This allows for the ability to redirect data on a failed connection to the base Target and/or easily setup, one-to-many scenarios for distribution purposes. Selecting this menu item will open the Alternate Target Path Selection dialog.

 

To add an alternate or additional Target click "New," then type the desired path into the field located at the bottom of the dialog or select the "Browse" button to select a path.. Repeat this process for each Target path you wish to add. Entries can be deleted by selecting them from the list and clicking the "Delete" key at the bottom of the box. You can also use the "Up" and "Down" buttons to reorder the paths.

 

 

Notes:

 

1.This feature requires the Enhanced Package.

 

2.Alternate Target Path Selection is not available for TCP.

 

3.When using Alternate Target Path Selections you cannot use variables that are specific to the Job (i.e. %JobName%, %SourcePath%, etc.) for the Move unmatched Target Files option.