Dell EMC Celerra | VNX | VNX2 Settings

<< Click to Display Table of Contents >>

Navigation: PeerSync Help > Interface Features > Selection Tree > PeerSync > PeerSync Job Settings > Folder Selection > Source Folder Selection > Source Folder Configure Button >

Dell EMC Celerra | VNX | VNX2 Settings

This screen is available when using the Dell EMC Celerra | VNX | VNX2 detection method.

Automatically use recommended settings based on Detection Method

Automatically use recommended settings based on the detection method selected.

Control Station Options
Control Station IP	The Control Station IP address of the VNX system.
Control Station Username	Username used to sign into the VNX Control Station.
Control Station Password	Password used to sign into the VNX Control Station.
Control Station Port	The Control Station Port number of the VNX system. Default value is 443.
CEPP Pool Name	The CEPP Pool Name to be used by the VNX system.
Validate Control Station	If enabled, the VNX Control Station will be validated both on registration and periodically by a maintenance thread.
Include Alternate Shares	Include Alternate Shares in detection of the VNX system.

System Information for Source Host
Validate	Click this button to display a short description about the source storage device that PeerSync is connecting to. This also checks if the credentials provided gain access to the source storage device.