EMC Celerra/VNX Settings

Automatically use recommended settings based on Detection Method

Automatically use recommended settings based on the detection method selected.

Control Station Options

Control Station IP

The Control Station IP address of the VNX system.

Control Station Username

Username used to sign into the VNX Control Station.

Control Station Password

Password used to sign into the VNX Control Station.

Control Station Port

The Control Station Port number of the VNX system. Default value is 443.

CEPP Pool Name

The CEPP Pool Name to be used by the VNX system.

Validate Control Station

If enabled, the VNX Control Station will be validated both on registration and periodically by a maintenance thread.

Include Alternate Shares

Include Alternate Shares in detection of the VNX system.

Filtered Locations Options

Filtered Locations

(Optional) String containing the locations to be filtered in the following format: <ServerName>:<ShareName>,<ServerName>:<ShareName>

Notes:

•To specify that all shared in a server are specified, use an asterisk "*". Example: <ServerName>:*,<ServerName>:<ShareName>

•To specify that no shares in a server are specified use a pipe instead

•The string length should not exceed 256 characters

Use Filtered Locations As - Include

(Optional) Select this option if the Filtered Locations should be included.

Use Filtered Locations As - Exclude

(Optional) Select this option if the Filtered Locations should be excluded.