Dell EMC Configurations

<< Click to Display Table of Contents >>

Navigation:  Peer Global File Service Help > Preferences > NAS Configuration >

Dell EMC Configurations


Peer Management Center supports the ability to include content from CIFS/SMB shares on one or more Dell EMC storage devices within most available job types.  These Dell EMC devices can be running PowerScale/Isilon, Unity, or VNX.  For detailed information about Dell EMC prerequisites, see Dell EMC Prerequisites.

To create a new Dell EMC configuration:

1.Select Preferences from the Window menu.

2.Select NAS Configuration in the navigation tree.

3.Select Dell EMC Configurations.

The Dell EMC Configurations page is displayed.  It lists any existing configurations.

Dell EMC Configurations

4.Click the Create button.

The Management Agent page appears.

Dell EMC Management Agent

5.Select a Management Agent, and then click Next.

The Storage Information page appears.  The fields in the Credentials section vary, depending on the selected platform type; VNX is selected by default.

Dell EMC Storage Information

6.Select the device type, and then enter the required values in Credentials:

Dell PowerScale | EMC Isilon Credentials

Dell EMC Unity Credentials

Dell EMC VNX Credentials

7.(Optional) Click the Advanced button if you want to specify advanced options, and then enter the required values:

Dell PowerScale | EMC Isilon Advanced Options

Dell EMC Unity Advanced Options

Dell EMC VNX Advanced Options

8.Click Validate.

9.Click Next.

10.Click OK.