Configuring SMTP Email

<< Click to Display Table of Contents >>

Navigation:  Peer Management Center Help > Preferences >

Configuring SMTP Email

Before the Peer Management Center can send emails on behalf of any job, a few key SMTP settings must be configured. To set these values, click the Window menu, and then select Preferences. In the dialog that appears, select SMTP Email Configuration from the tree node on the left. The following is displayed:

global_smtp_37

 

SMTP Host (required)

The host name or IP address of the SMTP mail server through which the Peer Management Center will send emails.

SMTP Port

TCP/IP connection port (default is 25 and 465 for encryption) on which the mail server is hosting the SMTP service. It is recommended that you leave the default setting unless your email provider specifies otherwise.

Encryption

Check this box if the SMTP mail server requires an encrypted connection.

Encryption Type

If encryption is enabled, an encryption method must be selected. TLS and SSL are the available options. If you do not know which one your mail server requires, try one, and  then the other.

User

The username to authenticate as on the SMTP mail server (optional).

Password

The password of the username specified above (optional).

Sender Email (required)

The email address that will appear in the From field of any sent emails. This email address sometimes needs to have a valid account on the SMTP mail server.

Use Recommended Office365 Settings

Enable this check box if you are connecting to an Office 365 SMTP server to use recommended settings for the connection. Follow Microsoft's Direct Send recommendations to setup Email configuration with an Office 365 SMTP server.

It is highly recommended that you test your SMTP settings before saving them. To do so, click the Test Email Settings button. You will be prompted for an email address to send the test message to. Upon submission, the Peer Management Center will attempt to send a test message using the specified settings.